Canopy Float Instructions
1.) Assemble your canopy to the manufacturer's instructions.
2.) Position your canopy so it can stand on its own.
3.) Open the canopy so the legs of the canopy are spread out about 2 feet apart from each other.
4.) Remove one canopy float from the carrying bag and place one leg of the canopy inside the middle hole.
5.) Use one bungee strap to feed through the slits of the center hub and wrap twice around your canopy leg.
6.) Feed the bungee strap through the other slit and secure it around the ball of the bungee. 7.) Repeat steps 1-6 for the remaining 3 legs of canopy utilizing the three remaining floats.
8.) Once all steps are completed open your pop-up canopy and make sure it is locked and secured according to manufacturer's requirements of the canopy.
Anchor Bag Instructions
Your kit includes an anchor bag. This bag is designed to be filled with sand while at the beach. The anchor comes with a short string, a float and two clips. Please use caution while using the anchor. Do not solely rely on anchor in strong winds or currents. You can also use many different varieties of ropes and anchors to secure the canopy floats while at the beach, pool or to attach to your boat in the Ocean.
1.) Open the bag and fill 3/4 full of sand.
2.) Close the bag and fold the top of the bag over and buck tight to secure.
3.) Use the clip and clip the two rings together.
4.) Push the other side of the rope through the handle and clip it back to the rope.
5.) When finished using the anchor, pour out sand and rinse out the bag.
Care of Products
We recommend rinsing all your canopy floats, and your pop-up canopy with fresh water after every use. Leave products out to dry before storing away. Your pop-up canopy will be exposed to water and elements and overtime will corrode.
Coastal canopy floats cannot be liable for damage to your pop-up canopy.